This 1.5 bar flexible test inflatable pipe stopper has an expansion range of 200-400mm/8-16" and is fitted with a 2" bypass. This flexible test pipe stopper requires an inflation pressure of 1.5 bar, and is suitable for pipes with a diameter greater than 185mm, and a maximum back pressure of 0.5 bar (5m head of water).
The 2" bypass valve can be blanked off, used to divert a water flow, or used as part of a test as required.
The stopper can be purchased in the following configurations:
- On its own
- With a 10m hose only
- With a 10m hose and a compressor controller
- With a 10m hose and a hand pump controller
- With a 10m hose, a hand pump controller and a hand pump
Please Select from the drop-down options above.
This stopper can also be purchased with an air test adapter with Series 26 male fitting for connection to smaller flexi-test stoppers with Series 26 female bypass connections. This allows simultaneous pressurisation and testing of pipework using Series 26 test connections.
Flexible test inflatable pipe stoppers are a single stopper which provides the functionality of a blank or bypass stopper, and can be used for back pressure, proofing and seal tests on a pipe. These stoppers are made from high-quality rubber with a fabric insert.
| Inflation Range |
200-400mm / 8-16 Inches |
| Minimum Pipe Diameter |
185mm |
| Length |
680mm |
| Inflation Pressure |
1.5 bar |
| Max Back Pressure |
0.5 bar |
| Weight |
7.2kg |